Sper Scientific 850082 ATC Temperature Probe - Manual (Page 3)

.
- 3 -
III. MEASUREMENT PROCEDURES
• Plug probe into the PROBE INPUT SOCKET.
• Make sure the PROBE LOCK is in the lock position.
• Turn on the instrument by pressing the POWER button.
• Immerse the PROBE HEAD into the solution to be measured.
• Press the A (°C/°F) button to select Centigrade or Fahrenheit. The
temperature is shown on the lower display.
Refer to the Water Quality Meter 850081 Instruction Manual for complete
instructions about Hold, Max./Min, RS232, Auto Shut Off, and other
functions.
IV. SPECIFICATIONS
Unit of
Measure
Probe
Range
Resolution Accuracy
°C 0 ~ 65 ± 0.8
°F 32 ~ 149 ± 1.5
pH
(w/opt. probe)
0 ~ 14 0.01 ±(0.02PH + 2d)
0.1
Operating Temperature (meter) 0°C to 50°C (32°F to 122°F).
Operating Humidity Max. 80% RH.
Sensor Type Precision thermister.
Probe Size Head Diameter: 0.15" (3.9mm).
Head Length: 4.2" (106mm).
Handle Diameter: 0.4" (11mm).
Handle Length: 2.4" (60mm).
Refer to the Water Quality Meter 850081 Instruction Manual for meter specifi-
cations.