Sper Scientific 850083 Conductivity Probe - Manual (Page 2)

- 2 -
TABLE OF CONTENTS
I. INTRODUCTION ............................................................................. 2
II. PANEL DESCRIPTION ................................................................... 2
III. MEASUREMENT PROCEDURES .................................................. 3
IV. CALIBRATION ................................................................................ 3
V. SPECIFICATIONS .......................................................................... 4
VI. WARRANTY .................................................................................... 4
I.
INTRODUCTION
This probe measures conductivity and temperature in °C or °F . Features
a long-life carbon rod electrode and built-in automatic temperature com-
pensation (ATC), or selectable uncompensated readings. With the plug-
and-play feature of this probe, calibration procedures are generally not
required. The meter features Hold, Max./Min, RS232 and Auto Shut Off.
II. PANEL DESCRIPTION
1. LCD Display 6. B & Left (Range) Button 11. Probe Lock
2. POWER Button 7. C & Down Button 12. Probe Input
3. REC. Button 8. D (TEMP.C) Button Socket
4. HOLD Button 9. Battery 13. Probe Head
5. A & Up (°C/°F) Button 10. pH BNC Input Socket 14. Probe Handle
13
14
8
7