Troubleshooting, Error codes – Sper Scientific 850068 Hybrid Powered Environmental Meter User Manual
Page 23
Advertising
- 23 -
TROUBLESHOOTING
No Display:
Ensure that you have pressed POWER
for longer than 100mS.
Ensure that the batteries are in good
condition, have proper contact, and are
in correct polarity. When in doubt,
replace the batteries.
Display Disappears:
If the low battery indicator appeared on
the LCD before the display
disappeared, replace the batteries.
Disable the Auto-Off function and place
the unit in Record Mode. (Refer to
Record Mode and Auto-Off Selection
page 19).
ERROR CODES
- - - - Measurement is out-of range.
Indicates low battery, replace
batteries.
Advertising