Sper Scientific 300038 Software for 300037 Refractometer - Manual (Page 10)

10
Figure 8 shows the function side of the Custom Scale screen with an explanation of each function under the Parameter
tab.
Figure 8
Scale Name: Choose the name you wish to appear in both the
“Custom Scale Database” and “Switch Scale” lists.
Select Dimensions (Unit of Measure): You may choose either
% (Percentage) or ° (Degrees) symbol and under Select
Dimension type in the name of the solution as you wish it to
appear on your measurement results screen (see figure 4
above) i.e. Sodium Chloride. Under Scale Name type in the
name of your solution as you wish it to appear in your scale
database, i.e. NaCl.
Scale Range Min: The minimum nD value of your custom scale
range. In the case of our example from Figure 1, 1.3330
Scale Range Max: The maximum nD value for your custom
scale range. In this example, 1.5318
Scale Value Min: The minimum numeric user value for your
custom scale range. In this example 0.
Scale Value Max: The maximum numeric user value for your
custom scale range.
Decimal Place: Choose the resolution that your custom scale
computes and displays.
Display Position: Specify Custom Scale 1, 2 or 3 display
positions on your refractometer