Sper Scientific 800057 Additional Sensor for Temperature Datalogger Set - Manual (Page 10)

SPER 800057
9
4. During temperature recording, recorder will turn on
the LCD for 2 seconds and then go into power saving
mode during each record interval.
5.3 Erase Memory
1. Press and hold
simultaneously for 3 seconds to
clear memory.
2. LCD will display “CLr”.
Memory display will resume in full status
Note: You cannot erase the memory while
temperature recording is active.
5.4 Download Data
1. Dock the recorder to the
communication base and connect
the RS-232 cable to PC.
2. Run the SE-345 software, LCD
will display “RS-232” to indicate
the linking status.
INTV
Data Logger: 64,000 Records
SELECT Erase
MEMORY
3 Sec 1 Sec
REC
TV
800057
REC MEMORY
64,000 Records Data Logger:
INTV
SELECT Erase
3 Sec 1 Sec
800057
800056