Sper Scientific 800100 Infrared IR Thermometer LED Pen - Manual

SPER SPER SPER SPER
SCIENTIFIC
SCIENTIFIC SCIENTIFIC SCIENTIFIC
800100 IR Thermometer/ LED Light Pen is unique in two respects: The bright white LED light on one end makes the thermometer
ideal for quick field inspections in HVAC, Industrial Hygiene and other applications, while the pen sized case makes it convenient
to carry and insures it is always on hand. Since the flashlight has a separate battery, the thermometer will work even when the
flashlight battery is dead. The infrared (IR) lens has a protective twist on/off cover.
Operation:
1. Press LED Light button (6) to use the LED Light (7). Press the button again to turn the LED Light (7) off.
2. For IR measurement, unscrew the protective cover, point the IR Lens (1) at the target and press the IR button (3). The
measurement is displayed on the LCD (2).
3. Measurement is constantly updated as long as the IR button (3) is depressed.
4. When the IR button (3) is released, the last measurement remains on the LCD (2) until the unit turns off (approximately 15
seconds), or until the IR button (3) is pressed again.
5. When the IR measurement is displayed on the LCD, the backlight will turn on and remain active for 10 seconds.
Note: Readings may fluctuate if the pen is moved during measurement. This thermometer is not intended for medical evaluations.
°F/°C: To switch between temperature scales, gently insert the end of a paperclip into the pick hole on the back (opposite the IR
button (3). The LCD (2) displays the selected scale.
1:1 Distance-to-Spot: The target must be larger than the spot size. The farther you are from the object, the larger the spot.
For example, if you are 2 feet from the target, the measured area is a 2 foot radius.
Description:
1. IR Lens (without cover)
2. LCD with backlight
3. IR Button
4. Battery Access
5. Batteries
6. LED Light Button
7. LED Light
1 2 3 4 5 6 7