Meter components – Sper Scientific 800108 IR Thermistor Pen User Manual
Page 6
Advertising
- 6 -
Rotating Probe
The thermistor thermometer
includes a built-in 5.3” rotating
probe. To rotate the probe:
1. Hold the probe tip and swing
it away from the meter until
the probe locks at a 90°
angle from the meter.
2. From the 90° postion, pull
upward until the probe locks
at 180° angle from the meter
(the probe is now fully
extended).
3. While pressing the release
button on the swivel knob,
hold the probe tip and push
the probe back toward the
meter.
METER COMPONENTS
Advertising