Telenav for Sprint Supported Devices: v5.9 for Brew MP devices - Manual (Page 16)

© 2013 Telenav, Inc. PAGE 16 OF 32
Traffic Summary
Displays overall delay from traffic, a summary of incidents on the route, and the average speed for each segment where
available. You can choose any line to view more details.
If a line shows a traffic incident, you can play the audio for it by choosing the speaker icon.
You can quickly avoid very slow traffic by choosing Minimize Delays on the screen and then choosing a suggested
route.
Below is an explanation of what you will see on the Traffic Alert screen:
• Incidents (triangle icons) – Total number of remaining incidents directly along the route. The color of the
triangle indicates incident severity:
Color Severity
Yellow Only Minor incidents
Orange At least one Major incident,
no severe incidents
Red At least one Severe incident
• Delay – Total time delay caused by traffic conditions, or the sum of delays on each segment.
NOTE: Delay refers only to the route currently shown.
• Go – Distance until next turn.
NOTE: This is not the distance from the origin but the length of each road segment.
• Street – The street or highway name of the road segment.
• Mph/Kph – Average speed on that road segment.
NOTE: “N/A” is displayed for segments without traffic flow information (usually local streets) or segments farther than
200 miles away.
If you choose an incident line, you can view the details. Below is an explanation of what you will see on the Traffic Detail
screen:
• Delay – The additional time it will take to travel the segment as compared with the time it would take if
traveling at the posted speed.
• Travel Time – Estimated time it will take to travel the segment.
• Slowest Speed – Slowest speed observed on the segment.
• Average Speed Bar – Average speed of a segment on a scale of zero to the maximum-posted speed for
that segment.
• Incident Detail – Each incident is displayed with the following:
o Incident icon color-coded by severity
o Location
o Additional comments
NOTE: If there is no flow information for a segment, the Average Speed bar on the Details page is grayed out.