Yetter 2967-035 TITAN Universal Face Plate Mounted Floating Residue Manager - Manual (Page 14)

14
MAINTENANCE
Lubrication
CAUTION: To help prevent serious injury or death to you or others caused
by unexpected movement, service machine on a level surface. Lower
machine to ground or sufficiently lock or block raised machine before
servicing. If machine is connected to tractor, engage parking brake and
place transmission in "PARK", shut off engine and remove key. If machine
is detached from tractor, block wheels and use shop stands to prevent
movement.
CAUTION: Do not clean, lubricate, or adjust machine while in motion.
Use grease based on NLGI consistency numbers and the expected air temperature
range during the service interval.
Use a multi-purpose lithium, water resistant, moderate speed, and NLGI grade
#2 grease.
Other greases may be used if they meet the following NLGI Performance
Classification: GC-LB
IMPORTANT: Some types of grease thickener are not compatible with others.
Consult your grease supplier before mixing different types of grease.
Alternative Lubricants
Conditions in certain geographical areas may require special lubricants and
lubrication practices which do not appear in the operator's manual. If there are any
questions, consult Yetter Manufacturing Co. to obtain latest information and
recommendation.
PART #
DESCRIPTION OUNCES OF GREASE
2967-404 13” TAPER TOOTH R.M. WHEEL 1.12 OZ
2967-602 13” SHARK TOOTH R.M. WHEEL 1.12 OZ
2967-186 FLOATER WHEEL KIT W/R.M. WHEEL 2.08 OZ
2967-596 HEAVY DUTY OR BEVEL R.M. WHEEL
W/ FLOATER WHEEL KIT 2.40 OZ
Storing Lubricants
Your machine can operate at top efficiency only if clean lubricants are used.
Use clean containers to handle all lubricants.
Store them in an area protected from dust, moisture and other contaminants.