Assembly instructions – Yetter 2967-035 TITAN Universal Face Plate Mounted Floating Residue Manager User Manual
Page 6
6
ASSEMBLY INSTRUCTIONS
2967-035 RESIDUE MANAGER ONLY
NOTE:
Do not fully tighten the mounting
hardware at this time. Alignment
adjustments will be made once the R.M.
wheels are attached.
When using the 2967-035 Residue
Manager unit with out a coulter, attach the
2967-281 – Mount W.A. using 4) ½” x 1 ½”
bolts, large flat washers and lock nuts.
JD MAX EMERGE II COULTER
Use 3) ½” x 2” carriage bolts when mounting a JD
MEII coulter or a White single arm coulter
(700728036).
Use 4) ½” x 2” carriage bolts when mounting a JD
7000 coulter, Kinze double arm, White double arm, or
the Yetter 2960-130 Double Arm Coulter.
2960 SERIES II UNIT MOUNTED CONSERVATION COULTER
Use 2) ½” x 2” carriage bolts (upper holes), 1) ½” x 2”
hex bolt and a large flat washer (lower left hole) are
used when mounting the Yetter Series II coulter.