Assembly instructions – Yetter 2984 High Residue Maverick Opener User Manual
Page 10
Advertising
10
ASSEMBLY INSTRUCTIONS
STEP 5. Mount the coulter blade to the hub assembly using 4) 2505-339 – ½” x 1 ½” carriage bolts, ½” lock
washers and ½” hex nuts. Torque to 90 ft. lbs.
STEP 6. Mount the coulter blade/hub assembly to the lower end of the hub plate using 1) 2984-311 – 5/8” x
6” NF bolt, 2) 21/32” x 1 ¼” x ¼” THK washers and 5/8” castle nut. Do not fully tighten 5/8” castle nut at
this time. Do not install 1/8” x 1” cotter pin at this time.
Advertising