Assembly instructions – Yetter 2984 High Residue Maverick Opener User Manual
Page 16
16
ASSEMBLY INSTRUCTIONS
2984-024 – NOTCHED DISC SEALER KIT
2984-023 – SMOOTH DISC SEALER KIT
STEP 3: Assemble the blades to the 2965-hub and bearing assembly, 5/8” x 4” D-bolt and 1-1/2” OD x
21/32” x 3/16” thick flat washer. Bolt the cap, blade and hub assembly together using 4) 5/16” x 1-1/4”
carriage bolts and 5/16” lock nuts.
IMPORTANT: 2527-530 washer must be installed or blade and hub assembly will fall off during use.
NOTE: During assembly be sure to align the grease-fitting hole in all the components to assure proper
lubrication of the bearing. Use general-purpose grease before use of the openers.
Service Tip: For extra protection against bearing contamination use silicon caulking between the contact
areas of the hub cap, blade and hub/bearing assembly.