GReddy PRofec B Quick Install - Manual

• These tips should not be used to replace the normal insturction manual. Always read and
understand the instruction manual fully, before attempting any installation.
• Always use the provided filters on the suggested hose. (See Boost Controller Instruction)
• Secure all line with wire ties or hose clamps
• Make sure the dip switches on the back of the head unit is on the correct setting.
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
PRofec Dip Switch Settings
ACTUATOR TYPE
ACTUATOR TYPE
EXTERNAL TYPE
EXTERNAL TYPE
(WHEN OVER BOOST OCCURS)
(WHEN OVER BOOST OCCURS)
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
SELECTOR
4 3 2 1
ON
WHEN OVER
BOOSTING OCCURS
NORMAL
WHEN BOOST
FALLS OFF
NORMAL
ACTUATOR TYPE EXTERNAL TYPE
OFFSET: -100~+100% OFFSET: -50~+50%
A Spec. Settings B Spec. Settings
IN
OUT
PRofec B-spec
(2)
(3)
PRofec A-spec
(2)
(3)
(1)
(1)
(2) (3)
T.V.V.C. MINI
Port TVVC A-spec B-spec
(1) Not Used A Head unit
(2) IN B IN
(3) OUT C OUT
Intercooler
Intake Manifold
Engine
Top Port of the External Wastegate
Turbocharger
Throttle body
(2)
(3)
Standard External Wastegate Installation
(1) Intake Manifold
(2) Pressure Source
(3) Actuator / Top External
(1)
Charge Pipe
Side Port of the External Wastegate
Intercooler
Intake Manifold
Engine
Throttle body
(2)
(3)
Standard Actuator Wastegate Installation
(1) Intake Manifold
(2) Pressure Source
(3) Actuator / Top External
(1)
Charge Pipe
Actuator
Turbocharger
Also avaliable are Application Specific Diagrams for:
1993-97 Supra (JZA80) 1993-96 RX-7 (FD3S) 1990-98 3000GT (Z16A)