Setting up static ip on the computer, Windows 98 se – Actiontec electronic GT701WRU User Manual
Page 100
Advertising
95
Setting Up Static IP
on the Computer
To communicate with the Router from a computer on the network (to use the Web
Configuration Utility, for example), the user may have to switch the
IP
address set-
tings from
DHCP
-enabled to static
IP
, so that the computer and the Router are on
the same network subnet.
To set up static
IP
on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Router’s fac-
tory default
IP
address. If the Router’s
IP
address has been
changed, enter the new
IP
address when instructed to enter an
IP
address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
B
Advertising