Actiontec electronic GT701WRU - Manual (Page 48)

42
Actiontec 54 Mbps Wireless Cable Router User Manual
43
Chapter 4 Using Advanced Setup
Specify a Static IP Address
Select this option if the ISP service is configured to use RFC 1483 Bridged or Routed
using a Static IP Address. Enter the IP Address, Subnet Mask, and Default Router
Address provided by the ISP in the “Broadband Connection via Static IP Address”
screen, which causes the IP address and routing information to terminate at the
Router, as opposed to the IP address and routing information being bridged to ter-
minate at the computer. This allows the use of the router capabilities for the Local
Area Network (
LAN ).
☞
Note: Contact the ISP if unsure of the proper configuration.