Monoprice 8744 PoE Wireless Access Point - Manual (Page 13)

13

Static IP
：
The default IP address is 192.168.0.254. If necessary,
you can configure a new IP address, subnet mask and gateway
manually for the device.

Dynamic IP
：
Automatically obtain IP address, subnet mask and
gateway from DHCP server. (Unless you have got permission to
obtain this information from the uplink connected device, otherwise,
it is not recommended to select this way).
Note: If the LAN IP address is changed, you need use the new IP
addres
s to login the wireless AP’s Web interface next time.
Chapter 4 Wireless Settings
This chapter introduces your wireless settings in two working modes:
Access Point (AP) and Bridge (WDS), including basic settings, security
settings, advanced settings, access control, and connection status.
4.1 Basic Settings
This period introduces the you basic settings in AP mode and WDS mode.