Monoprice 8744 PoE Wireless Access Point - Manual (Page 30)

30
Setting Explanation
：

BG Protection Mode
：
For 11b/g wireless client, it is easier to
connect with 11n wireless device. The default is “Auto”.

Basic Data Rates: In term of different requirements, you can
select one of the suitable Basic Data Rates from the drop-down
menu. Here, default value is (1-2-5.5-
11Mbps…). It is
recommended not to modify the default value.

Beacon Interval
：
The frequency interval of the beacon, which is a
packet broadcast by an AP to synchronize a wireless network. The
default value is 100 ms.

Fragment Threshold
：
The fragmentation threshold defines the
maximum transmission packet size in bytes. The packet will be
fragmented if the arrival is bigger than the threshold setting. The
default size is 2346 bytes.

RTS Threshold
： RTS stands for “Request to send”. This
parameter controls what size data packet the frequency protocol
issues to RTS packet. If the device works in SOHO, do not modify
the default value.

TX Power： Set the wireless output power level. The default value is
100.

WMM Capable
：
To enhance wireless multimedia transfer
performance (0n-line video and voice). If you are not clear about
this, enable it.

APSD Capable
：
It is used for auto power-saved service. The
default is disabled.