Monoprice 8744 PoE Wireless Access Point - Manual (Page 33)

33
and the SNMP management system. A defined collection of variables
(managed objects) are maintained by the SNMP agent and used to
manage the device. These objects are defined in a Management
Information Base (MIB), which provides a standard presentation of the
information controlled by the on-board SNMP agent. SNMP defines both
the format of the MIB specifications and the protocol used to access this
information over the network.
5.2 SNMP Setting
This device supports SNMP v1 and SNMP v2c. Please click “SNMP
Setting” in the left page to enter the following window:
Click “enable” or “disable” to enable and disable SNMP management.
Setting Explanation
：

Contact
：
Set the name to access the AP. Usually set the
administrator’s name.

Device Name
： Set the AP’s name, such as Monoprice_MW300A.

Location
： Set the AP’s network location.

Read Community: Indicates the community read access string to
permit
reading this AP’s SNMP information. The default is Public.