Dee Zee DZ1061 - Manual (Page 11)

Using the slots in the brace as a guide, drill a 1/4" hole at each mounting location.
Clamp the board to the brace to hold it in position.
Attach the running board to the angle brace using the 1/4" x 1" ribneck carriage bolt [I],
1/4" flat washer [L], and 1/4" hex nut [M]. Tighten using a 7/16" wrench or deep well socket.
7
8
DZ 1059 9 of 10 4/24/2014