Dee Zee DZ1061 - Manual (Page 5)

Remove the bolt from the body shock mount at each of the mounting locations using a 21mm socket.
Put the body shock mount bolt through the hole in the brace [D] and thread it back into the body shock
mount. Align the braces so that they are perpendicular to the side of the vehicle. Tighten the bolts
to 44 ft-lbs plus another half turn.
The driver's side is shown. The front of the vehicle is to the left of the pictures.
2
3
REMOVE
BOLT
DZ 1059 3 of 10 4/24/2014