Dee Zee DZ1061 - Manual (Page 9)

Place the bulb-seal gasket [H] onto the backlip of the runing board [A]. Cut the bulb-seal gasket
with tin snips so that it is flush with the ends of the board
Loosely attach the mud flap [G] to the end of the running board using
the 1/4" x 3/4" hex head bolt [J], the 1/4" flat washer [L], and the 1/4" hex nut [M].
Snug the bolts, but do not completely tighten at this time.
4
5
DZ 1059 7 of 10 4/24/2014