Night Owl WMC Series - Manual (Page 28)

Night Owl L / TL / P / WMC Series Manual
28
CHAPTER 10 - ADVANCED
1. Set up Motion Detection parameters
[Motion] Tab: Enables the motion detection function and lets you adjust sensitivity.
Select a channel and Enable motion detection
Choose an area and you will see the channel output full screen
Drag the boundaries of the square to cover the area where you want to detect motion.
Right Click to return to Motion screen and select the level of sensitivity from 1-6.
2. Message - Message on will alert you to motion detection on your Live Feed.
Buzzer - Buzzer ON will issue a beeping sound alert you that motion has been detected.
Email - Send Email will send out an email notice that motion has been detected (see ?)
[Network icon] [Email] tab.
Record Channel
– Let’s you activate motion detect for one or more channels
Post Recording is settable for 30 seconds to 5 minutes after motion is detected.
Copy across channels as you wish and click [Apply] to save.