Night Owl WMC Series - Manual (Page 7)

Night Owl L / TL / P / WMC Series Manual
7
Before you start the automatic setup please ensure you have connected your
DVR to your router or modem with an Ethernet cable, and make sure that your
router/modem is connected to the internet.
A. The first step in configuring your Night Owl DVR is to setup a user name and
password. Enter your username and password in the fields shown and click [Next Step].
It is highly recommend that you setup a username and password.
B. Click [Automatic] on the Network and System Setting screen
C. Click [Test] to check your DVR to router/modem connection or [Previous] to go back
to setup choices. If you are connected to your router/modem and the router/modem is
connected to the internet you will see a screen confirming success. If there is an issue
with your connection you will see a screen displaying a connection error. If you see this
screen please check your connection of the DVR to the router/modem and your router
/modem connection to the Internet.
D. Click [Next Step] to proceed to Step 2 - Mobile Access configuration.
Alternate Step 1 for Experienced Users/Manual Setup: If you are already familiar
with the Night Owl system this is a quick way to change your Setup. The Startup Wizard
will appear every time you power up the system unless you check the option not to
show it on the [Advanced] page/[Maintain] tab.
A. The first step in configuring your Night Owl DVR is to setup a user name and
password. Enter your username and password in the fields shown and click [Next Step].
It is highly recommend that you setup a username and password. If you are returning to