Night Owl X100-DVR8-5GB user manual - Manual (Page 101)

Chapter 24: Internet Viewing
101
Device Tab
To add a device you must first add a group by selecting the plus (+) sign in
the navigation pane. Next, right-click your mouse on the group that you
would like to add the device to, and then select Add a Device.
Once you have selected Add a Device you will need to configure the
settings:
• Group: Indicates the group you are adding the device to.
• Name: Name this anything, such as Home or Office.
• IP: Enter the IP Address that was configured in the DVR.
• Port: Enter the Media Port that was configured in the DVR.
• Web Port: Enter the Web Port that was configured in the DVR.
• Channel Count: This indicates the number of channels on the
device.
• Transmit Server IP: Select when recording on all channels. This
requires a fast network for transmission.
• User: Enter the user name that you created in the Password menu
of the DVR.
• Password: Enter the password that was assigned to the User.
• Stream Setup: Leave this set to the default (Main Stream). This will
give you the fastest speed for streaming your videos.