Night Owl X100-DVR8-5GB user manual - Manual (Page 79)

79
Chapter 21: Remote Access
4. Change the last three digits to 150. You will need this new number
in a later step. (Example: Say you wrote down the IP Address
192.168.0.104. When the last digits are changed, the IP address
will be 192.168.0.150.)
5. Write down this number. You will use this number as the IP address
of your DVR in the next section.
6. Find the Default Gateway.
7. Write down the Default Gateway number. This is the IP address of
your router. You will need to enter this in the DVR’s network
settings in the next section.