Night Owl LTE-44500 - Manual (Page 81)

80
PTZ Control
These control settings can only be used for cameras that have the Pan, Tilt,
and Zoom features. A PTZ camera is not included.

Arrows: These will move the camera manually in the direction of the
arrow.

Zoom: The + and
– zooms the camera in and out.

Focus: The + and
– focuses the camera to have a clear image.

Iris: The + and
– allow you to adjust the type of lens of the camera
to get the best picture in different lighting conditions.

Speed: This changes the speed of the camera when rotating.

Pan&Tilt Pos: This is the position that the camera is at before it
moves during the rotation.

Set PTZ preset positions.

Go to the selected preset spot.

Load a previous setting you have configured.

Save the current preset settings.

Start PTZ cruise.

Stop PTZ cruise.
Chapter 21 NetViewer Software