Night Owl LTE-44500 - Manual (Page 99)

98
Config
Adding a Device
To add a device select Config, select Device Manage, and select the group
where you would like to add the device. Right click the group and select
add device or select the Add button.

Device Name: This is what you want to name the DVR.

HTTP Port: This will be the web port (80).

User Name: This will be the user name used to log into the DVR.

Device IP: Using the software on the same network as the DVR,
you will enter the internal IP Address that you assigned to the DVR
in the Chapter 18 Remote Access. Using the software remotely,
you will enter the public IP address.

Channels: This will indicate the number of channels of the DVR that
you are adding.

Password: This will be the password assigned to the user name.

Auto Login: If enabled, this will automatically connect to the DVR
when the CMS opens.

Device Manufacturer: Select if the device is new, old, or other.

Automatically Identify Device: This will notify you if the DVR is
online and configured correctly.
Chapter 22 Control Management Software (CMS)