Night Owl 16BL-DVR-5GB - Manual (Page 41)

User’s Manual
39
6.2.10.2 Password
6.2.10.3 Language
6.2.10.4 Hard Drive
Click “Main Menu”  “System”  “Language” to
setup the default system language.
Click “Main Menu”
 “System”  “Password”.
This option allows you to set the user permissions
and password of up to 7 users.
.
The password supports up to 6 characters. Click
“APPLY” to save the settings.
NOTE: Please write down your passwords and
store in a safe location.
To manage the installed Hard Disk, click “Main
Menu”  “System”  “Advanced”  “Hard Drive” to
enter “HDD MANAGEMENT”. The HDD Management
screen shows the capacity and available recording time
of the installed hard drive and let you configure whether
to overwrite old recordings or stop when HDD is full.
Select “Format HDD” to format the installed Hard Disk
Drive and erase all recorded files.
Select “Format USB” to format the installed USB Drive
by erasing all recorded files on the drive.
To enable your DVR to overwrite old recording files,
choose “ENABLE” at the OVERWRITE field and then
click Apply.