AT&T 944 - Manual (Page 14)

13
FEATURE SET UP
Use the Navigation buttons to program or change the features setup.
• Press
G to enter the programming mode. The screen displays:
NOTE: If you do not press a key to continue programming within
20 seconds, the telephone automatically exits the programming mode.
• Press
- or + repeatedly to move through the list of options.
• Press
> to choose the option currently displayed.
• Press
S to store your selections and return to the ‘home screen’
for the feature currently displayed.
You can set up one feature at a time or you can set up a feature and then
move on to set up another feature. After you change one feature, press
+ or - to select another feature. When you are finished with features
setup, press
E to exit programming mode.
NOTE: After a feature is successfully programmed, the phone beeps
once. If the phone beeps twice, repeat the steps to set up the feature.
Feature
Options
Store your
selection and
move to next
feature
Scroll through
options
Confirm
option choice
Exit programming
mode
Enter
programming
mode