AT&T 944 - Manual (Page 16)

15
FEATURE SET UP
Select the Ringer Type
1 Press
G.
2 Press
- until the screen displays RINGER TYPE, then press >.
3 Press
- or + to select the desired setting. You will hear a sample
of each ringer type as you move through the settings.
4 Press
S to store your selection.
Set Delay Ring
Set the length of time before incoming calls will ring at this extension.
1 Press
G.
2 Press
- until the screen displays DELAY RING, then press >.
3 Press
- or + to select the desired setting. (One ring is about
six seconds.)
4 Press
S to store your selection.
Turn Line Usage On or Off for Each Line
If you are not using all four phone lines, you need to turn off Line Usage
for the unused lines. If you expand to a third or fourth line, turn Line
Usage back on.
You may also restrict the use of certain lines on this phone to intercom
and paging only, by turning off Line Usage for each line to be restricted.
When Line Usage is turned off, that line cannot be used to answer
incoming calls or to make outgoing or transfer calls.
1 Press
G.
2 Press
- until the screen displays LINE USAGE, then press >.
3 Press
- or + until the screen displays the desired line number,
then press
>.
4 Press
- or + to change the setting.
5 Press
S to store your selection.
6 Repeat Steps 1-5 to change the Line Usage status for additional
lines.