AT&T 944 - Manual (Page 32)

31
INTERCOM OPERATION
Making an Intercom Call with the Speakerphone
or Headset
With the handset in the cradle and the desired line idle,
1 Press
I. The phone will automatically activate the line
in the mode (headset or speakerphone) of the last call made.
2 Refer to the screen display and dial the extension number of
the party you wish to reach. If that extension is idle, you will
hear long beeps. If that extension is busy, you will hear a busy
signal. If that extension is set to Do Not Disturb, you will hear
short beeps.
Answering an Intercom Call
When you receive an intercom call you will hear a repeating double-ring
pattern and your screen displays
ICM with the extension number of the
caller. Answer the intercom call by lifting the handset, or by pressing
I, K or h to take the call hands-free.
Making a Single-phone Page
1 Press
p. The screen displays PAGE.
2 Dial the extension number of the party you wish to reach.
Answering a Single-phone Page
Auto-Mute Off
When your extension receives a page, the phone beeps and the speakerphone
is automatically activated. Answer the call by simply speaking.
If you are on the headset, you can answer the page by pressing
h
and speaking through the headset.
Auto-Mute On
The MUTE light will be on. Lift the handset or press
M to temporarily
deactivate Auto-Mute and answer the page.
Switching Between an Intercom Call and
a Single-phone Page
When making an intercom call, press
p to switch the call to a
single-phone page.
When making a single-phone page, press
I to switch the call
to the intercom.
Ending an Intercom or Page Call
Hang up or press
K or h again.