ALESIS K2661 - Manual (Page 91)

Master Mode
The Master Mode Page
11-1
Chapter 11
Master Mode
Press the Master mode button to enter Master mode, which contains parameters affecting the
K2661’s overall performance.
The Master Mode Page
On the Master-mode page you’ll find parameters for setting the overall tuning and transposition
of the K2661, the MIDI channel to be used for KB3 programs (explained below), and for several
keyboard and programming adjustments. You can also enter the sampler from the Master-mode
page.
Master||||||Samples:8192K|||Memory:485K|
Tune||||||:0ct||||||||||||||||||||||||||
Transpose|:0ST||||||||||||||||||||||||||
KB3Chan|||:1||||||||||||||||||||||||||||
VelTouch||:1|Linear|||||||||||||||||||||
PressTouch:1|Linear|||||Confirm||:On||||
Intonation:1|Equal||||||IntonaKey:C|||||
Object|Delete||Util||Sample|||GM|||MAST2
Tune
Adjusting the value of this parameter tunes every program in the K2661 by the amount you
specify. Tuning can be adjusted up or down 100 cents (one semitone) in one-cent increments.
This parameter is useful for getting in tune with recordings and acoustic instruments. Adjusting
the tuning in Master mode does not change the settings on the PITCH page of individual
programs, but will be added to any adjustments you make there. Master-mode tuning
adjustments affect only the K2661’s notes, and not notes sent via MIDI.
Parameter Range of Values Default
Tune ± 100 cents 0
Transpose ± 60 semitones 0
KB3 Channel 1 to 16 1
Velocity Touch Velocity Map list 1 Linear
Pressure Touch Pressure Map list 1 Linear
Intonation Intonation Table list 1 Equal
Confirm On, Off On
IntonaKey C–B C