Sandvik Coromant Silent tools - application guide - Manual (Page 40)

38
3. Turning
Centre height setting tool
For all cylindrical CoroTurn SL bars, there is a
quick and simple method to accurately ensure
correct centre height setting of the cutting
edge:
1. Attach the setting tool to the serrated edge
of the cylindrical boring bar
2. Twist the boring bar to the right position
3. The bar is parallel when the bubble is in the
centre position
Even though the bar will deflect slightly below
centre during the machining operation, the
correct mounting of the bar is on centre line.
Alternative setting tools are height gauge and
cross test lever.
Dampened 300 mm (11.81 inch) CoroTurn SL quick change boring bar with overhang 10 x BD.