Sandvik Coromant Silent tools - application guide - Manual (Page 53)

51
3. Turning
Operation General internal machining, light roughing
Component Process flange
Workpiece material CMC 01.1, P1.1.Z.AN, Low alloy steel
Machine cost EUR/hour: € 75
Working hour/week 80
Dampened adaptors usage 44%
Machined volume/pc cm 3 (inch 3 ) 54 (3.295)
Assembly length mm (inch) 406 (15.984)
Reference Silent tools
Adaptor C6-570-3C 40 368
Cutting head 570-DCLNL-40-12-L
Cutting data
n, r/min:
424 955
D
m
mm (inch): 60 (2.360) 60 (2.360)
v
c
m/min (ft/min) 80 (263) 180 (591)
f
n
mm/r (inch/r) 0.1 (0.004) 0.15 (0.006)
AP mm (inch) 1.0 (0.040) 2.0 (0.079)
Tot. cycle time 91.63 min 31.84 min
Tool life (no of comp.) 1.5 2.65
Productivity increase 188%