Posey Bed 8070 - Manual (Page 7)

Posey Bed - 8070 7
 Bed Assembly
3. Insert the caster leg frame (Part G) into the
wheel receiver at the head of the bed frame.
Press firmly to seat the caster leg frame (Part G)
completely down into the wheel receiver
(Fig. 2-C).
Tighten the allen screws on the caster leg
frame at the head of the bed (allen screws are
included on the caster leg frame).
DO NOT over tighten.
Caster Leg Frame Assembly
Materials:
• Part G (2)
• 3/16” allen wrench
NOTE: Bed assembly should be done near an
appropriate AC electrical outlet to assist with
assembly.
1. Lay the bed frame (Part M) on the floor, upside
down (Fig. 2-A).
2. Insert the caster leg frame (Part G) into the
wheel receiver at the foot of the bed frame.
Press firmly to seat the caster leg frame (Part G)
completely down into the wheel receiver
(Fig. 2-B).
Tighten the allen screws on the caster leg frame
at the foot of the bed (allen screws are included
on the caster leg frame).
DO NOT over tighten.
Fig. 2-A
Head
Side
Foot
Side
M
G
G
Fig. 2-B
G
M
Allen Screws
Fig. 2-C
M
G
Allen
Screws