Posey Bed 8060 - Manual (Page 26)

26 Posey Bed 8060

Purpose
Procedure
To safely assist a patient out of the Posey Bed 8060 so he/she may use the bathroom or other
reasons.
DO NOT use a patient lift unless already tested. This is to be sure there is enough room under the
canopy frame to transfer the patient safely without damaging the canopy.
During patient care and when moving the patient into and out of the Posey Bed 8060, lock all
hospital bed casters.
NOTE: Additional persons may be needed for a safe transfer.
Moving the Patient Out of the Bed
1. Access the patient.
2. Assist patient to an upright position.
NOTE: Be aware that a reclined
patient may have equilibrium
problems when arising – support as
needed.
3. Help patient out of the bed. Continue to talk gently to the patient to
reassure them.
a. Speak gently to ensure they are comfortable
and secure.
b. Check that they are a safe distance from the
panel.
c. Make sure area around the bed is clear of any
tripping hazards.
d. Put mattress in the flat position.
e. The caregiver must access the patient from
the open frame side.
f. Unclip the Quick-Release Buckle.
g. Unzip the side panel and secure with the
hook and loop tabs.
h. Detach tubes as needed.
a. Help patient slide both legs to the side of
the bed.
b. Change as needed depending on patient’s
needs.
c. Consider gait belts / transfer belts to assist
with patient transfer.
STEP DO THIS