Vaisala HMK15 - Manual (Page 30)

User's Guide ________________________________________________________
28 _____________________________________________________M210185EN-C
The following figure illustrates an example of temperature
and humidity stabilization. In this example, an HMP233
probe has been transferred from a temperature of 75 °C
(oven) to a suitable hole of the NaCl salt chamber; the
calibrator is at room temperature. The figure shows that
after 40 minutes, the humidity reading differs 0.2 %RH
from the final reading.
0606-175
Figure 12 An example of RH and T stabilization when
the probe is removed from a process