Vaisala HMT120 - Manual (Page 31)

Chapter 4 _______________________________________________________________ Service Port
VAISALA ________________________________________________________________________ 29
Set/Show Calibration Information
Use the CTEXT command to show or set the calibration info field.
(Calibration refers to the calibration of the HMT120's analog outputs.)
CTEXT [location]<cr>
where
location = Freely defined text string typically indicating the
calibration location
Examples:
>ctext
Calib. info: "VAISALA HELSINKI"
>
>ctext "Calibration lab 2"
Calib. info: "Calibration lab 2"
>