Changing the probe filter, Cleaning – Vaisala GM70 User Manual
Page 58
Advertising
USER'S GUIDE ______________________________________________________
58
_____________________________________________________ M010139EN-G
Changing the Probe Filter
Spare filters for the probe can be ordered from Vaisala, see section
Accessories on page 65.
1.
Remove the plastic grid by pulling it out.
2.
Remove the filter paper.
3.
Insert a new filter paper and plastic grid.
Cleaning
Wipe the plastic parts of the device with a damp paper or towel. Mild
washing agents can be used. Do not let water flow down to electronics
through the buttonholes.
Advertising