Installation, Wall mounting, To help you install this product – Vaisala GMT220 User Manual
Page 13: Chapter 3
Advertising
Chapter 3 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 13
CHAPTER 3
INSTALLATION
This chapter provides you with information that is intended to help you
install this product.
Wall Mounting
Mount the wall model transmitter or the remote probe into a place
representing the environment to be measured.
0807-035
Figure 4
Mounting the Transmitter
The following numbers refer to Figure 4 above:
1
=
Attach the mounting plate to the wall with screws.
2
=
Press down the transmitter so that it slides along the rails of
the mounting plate.
Advertising