Vaisala TCI101 NiteStar - Manual (Page 8)

VIEW : Exits memory store. Now the NITESTAR is back to
standard operation mode.
RUN/HOLD : Will start the NITESTAR counting.
The count value will be changing depending on your speed. The
MARK number is the number of the memory location and the code
is the code that you wish to store there. Typing any numbers on
the number pad will store those digits into the code field. If you
wanted the code 82 you would type an 8 then a 2. Typing more
than two digits will just shift the digits to hold the last two you
typed. These will be the only values stored. You can have any
code from 00 to 99.
Pressing the DISP/HOLD key (NS-60 only) will print the current
distance, delta distance and code (either as a number or plain
language) to the printer. The value will NOT be stored in the
memory. This is useful if you just want to mark events but not
store them.
12
Depressing the MARK/ENTR key will store the code and the cur-
rent distance into memory. When you do this the MARK value
will go up by one and the code will become 00 again.
This would have stored a code 82 at distance 3216 in location
number one (1). Now we are ready to enter location two (2).
You can continue in this way until all 99 locations are used and
the NITESTAR will automatically leave STORE MEMORY mode.
If you did not clear memory and start the MEMORY STORE again
it will start at the next unused memory location. If the display
flashes -FULL- , all locations are full and you will have to clear
memory before you can store more data.
If you wish to EXIT STORE MEMORY before filling all 99 locations,
depress the RUN/HOLD key to place the instrument in COUNT
HOLD mode and then depress 0VIEW key, (the MARK/CODE mes-
sage will disappear).
RECALLING EVENTS FROM MEMORY
Insure that the DMI is in COUNT/HOLD mode and the desired
UNIT mode is set.
• Depress the 0VIEW key
This starts the memory recall sequence. The first window dis-
plays the address number (MARK) and the code at this address.
The main distance window displays the road track distance
stored in this memory location.
For address location 1 we have code 12 and a distance of 34,234
from the starting point.
13