Vaisala Real-time Display Software YOURVIEW - Manual (Page 15)

Chapter 3 ______________________________________________________Installation and Startup
VAISALA _______________________________________________________________________ 13
0010-082
Figure 2 Registration Window at First Start-up
3. Click on the Name field and fill in the user name. Then click on
the Company field and give the company name. The serial
number appears automatically in the Serial Number field (for
example, Weather 1). Then click the OK button.
NOTE If the serial number field is left blank or it is not correctly filled in,
only the Receiver module will start. In this case, stop and close the
Receiver module. Start YourVIEW again and fill in the correct serial
number, as shown in Figure 2 above.
Changing the Password
After starting YourVIEW, the Change Password button appears on
the software registration screen (see Figure 3 on page 14). By default,
the password is left blank. However, we recommend you to change
the password to prevent unauthorized personnel from changing the
settings or from closing down the Receiver module.