Vaisala Real-time Display Software YOURVIEW - Manual (Page 16)

User's Guide ______________________________________________________________________
14 __________________________________________________________________ M210681EN-B
0010-083
Figure 3 Registration Window at Normal Operation
NOTE Once the Change Password button has appeared, you can change the
password within three seconds. After three seconds the button
disappears and YourVIEW will start.
The Data Socket window and 3 to 6 other windows will open on the
screen of your PC. Normally, the Real-time Display window is on
top.
Real-time Display
The Real-time Display window allows you to monitor the measured
and/or calculated values that the datalogger or sensor is sending. The
data update rate depends on the application. Typically, the data is
updated once a minute except for the wind data, which is updated
every 1–2 seconds.
If the data is not updated on the screen, make sure the COM port of
your PC is free to receive messages from the datalogger or sensor.
Also make sure that the command mode to the logger or sensor is
closed.
If data comes from some other computer through the PC network,
make sure the YourVIEW Data Socket Root URL setting is correct.
For more information, see section Configuration on page 29. If the
computer name is used, it is possible that the name service is not
available. Therefore, it is recommended to use the IP address instead