Vaisala Real-time Display Software YOURVIEW - Manual (Page 23)

Chapter 4 _________________________________________________________________ Receiver
VAISALA _______________________________________________________________________ 21
Control Buttons
The three main control buttons are Load, Save and Stop.
Load Button
When loading new receiving rules for Your VIEW or a new
configuration to Receiver, click the Load button. The file type is cfg.
Loading a new configuration is a password-protected operation. Type
in the password and click OK. Then select the *.cfg file. Restart
YourVIEW by clicking the
button at the top left corner.
Save Button
When creating a new receiving rule or modifying an existing one,
click the Save button. The current configuration of Receiver will be
saved to the Receiver.cfg file. This is a password-protected operation.
Type in the password and then click OK.
NOTE The old file is overwritten when changes are saved. Therefore, make
a backup copy of the original file.
Stop Button
The Stop button stops the Receiver module from running and
receiving any information. The changes made in the settings will only
take effect after you stop running Receiver and then restart the
program. This is normally a password-protected operation. Therefore,
type in the password, as shown in Figure 7 on page 22, and then click
OK.