Vaisala vLog 4.5 - Manual (Page 18)

System Requirements
12 © 2011 Vaisala Canada Inc
System Requirements
vLog software requires a PC with the following minimum
configuration:
• 32-bit or x64 version of: Microsoft Windows

XP,
Windows Server

2003, Windows Vista

,
Windows Server

2008, and Windows

7

• one available Serial or USB communication port (for
transferring logger data files; you can view graphs and
reports for previously transferred logger files without this
port).
Installing vLog Software
To install vLog software:
Note: vLog installation automatically uninstalls vLog
versions 4.3 and 4.4; earlier versions of vLog are
not uninstalled automatically. Also note that the
uninstall program will not remove logger files
(.spl), Graph files (.spg), Batch Setup files (.bsf)
or Audit trail files (.vat).
1 Ensure you have administrator privileges.
2 Start Windows, log in as the administrator, and close all
running applications. If you will be using the USB Logger
Cable, do not connect the cable until installation is
complete.
3 Insert the Vaisala Veriteq vLog CD into the CD-ROM
drive and wait for it to start automatically. If it does not
start automatically, from the
Start menu, select Run . Type
d:\setup and press Enter. If d:\ is not your CD-ROM drive,
type the appropriate drive letter.