Vaisala vLog 4.5 - Manual (Page 83)

Formatting Measurement Units
Vaisala Veriteq vLog 4.5 77
Formatting Measurement Units
vLog automatically determines Y-axis scales appropriate for
any displayed graph and sets a default number of decimal
places. If desired, you can override these settings.
Specifying the Y-axis Scale
To change a Y-axis scale:
1
With the Graph you want to modify open, select
Format | Units. The Format Units window opens.
2 Under Units , use the drop-down list to select the desired
units of measurement.
3 Under Change Settings For, use the drop-down list to
select where you want the changes to apply—the
Current Graph or System Default . If you select System
Default , the settings entered here automatically apply to
other new graphs that use the same units.
4 Under Scale select Manual , then enter the maximum and
minimum values for the axis that you want displayed.
5 Click Save to save changes, and OK to close.