Vaisala vLog 4.5 - Manual (Page 56)

Caring for Relative Humidity Sensors
50 © 2011 Vaisala Canada Inc
2 Attach the temperature probe to the connector on the
logger.
3 Use the Logger | Setup window to test the logger
operation (refresh the readings as required).
4 Place the logger in the desired location and start
recording.
Caring for Relative Humidity Sensors
Each Vaisala Veriteq SP- and VL-2000 Data Logger has a
relative humidity sensor. Although the sensor has been
designed to resist contamination and condensation, avoid
exposing the logger to contaminants, if possible.
For information on specific environments, contact Vaisala
Canada Inc.