Wiring examples, Sensors – Vaisala WAT12 User Manual
Page 25
Advertising
Chapter 3 __________________________________________________ Installation
VAISALA__________________________________________________________23
Wiring Examples
Refer to Figure 16 below for the basic wiring, when the
WAA151 and WAV151 wind sensors are connected to the
WAT12 transmitter.
0206-054
Figure 16 Basic Wiring with WAA151 and WAV151
Sensors
Figure 17 on page 24 illustrates the wiring with WHP151
Mains Power Supply.
Figure 18 on page 25 illustrates the wiring with WHP25
Mains Power Supply and the 252 series wind sensors.
NOTE
An expansion connector and discrete joining wires are
included in the WAA252 accessories.
Advertising