HighPoint RocketRAID 2322 - Manual (Page 11)

RocketRAID 2322 Hardware Description/Installation
RocketRAID 2322 Hardware
1 - RocketRAID 2322 Adapter Layout
Port1- Port2
These represent the RocketRAID 2322’s two external Mini-SAS ports. Each Mini-
SAS port hosts up to 4 SATA or SATAII hard disks.
BEEP1 - Speaker
Alarm (speaker): the speaker emits and audible alarm in the case of disk/array failure.
J2, J3 - Cross Adapter Ports
These jumpers enable cross-adapter (multi-card) RAID support. The RocketRAID
2322 includes a cable designed for use with these jumpers. Consult the Single-RAID
Cross Adapter section (page 2-3) for more information.
JP4 - RJ11 Port
Designed for use with the X4 and X8 external hard disk enclosures – enables the
RAID Management Console (see page 4-2) to monitor and manage various chassis
functions/attributes (temperature, hard disk status, etc.)
2-1