HighPoint RocketRAID 2322 - Manual (Page 57)

Linux Driver Support
Example: (2.4.21-4.EL for Red Hat Enterprise Linux 3.0):
# gzip -dc /boot/initrd-xxx.img > /tmp/initrd.ext2
# mkdir /mnt/initrd # mount -o loop /tmp/initrd.ext2 /mnt/initrd
# cp /tmp/rr232x.o /mnt/initrd/lib/rr232x.o # umount /mnt/initrd
# gzip -c /tmp/initrd.ext2 > /boot/initrd-xxx.img
If you are using lilo to boot the system, use “lilo” to reinstall the RAM disk:
# lilo
Update rr232x.o in /lib/modules:
# cp /tmp/rr232x.o /lib/modules/‘uname –r‘/kernel/drivers/scsi/rr232x.o
Reboot your system to allow the new driver take effect.
4 - Uninstalling the Driver
To uninstall the RocketRAID 2322 driver
Note: The driver cannot be uninstalled while the system is booted from a disk or array
attached to the RocketRAID 2322.
To uninstall the driver, remove the lines added to /etc/fstab, and remove the files
created in the /etc/init.d directory.
5-9